2 fiber lasers Trulaser 3030 (3 and 4 KW)
- Maximum cutting speed : 44 m/min
- Working area : 3000x1500 mm
- Automated sheet metal loader
2 CO2 lasers Trulaser 3030 (3 and 4 KW)
- Maximum cutting speed : 26 m/min
- Working area: 3000x1500 mm
TruPunch 5000
- Punching cadence max 1350 punches/min
- Marking rate max 3000 punches/min
- Punching force max 220 Kn
- Working area 3050x1550 mm
- Sheet metal thickness max 3 mm
Trumatic 2020R
- Punching cadence max 900 punches/min
- Marking rate max 2200 punches/min
- Punching force max 180 kN
- Working area 2500x1250 mm
- Sheet metal thickness max 3 mm
Trumabend V5320
- Speed max 25 mm/s
- Max. Folding length 4420 mm
- Max. Compressive force 320 tonnes
And also
- Trumabend V50 (50 Tonnes on 1 m folded edge)
- Trumabend V85 (85 Tonnes on 2 m folded edge)
- Trumabend V85S (85 Tonnes on 2,5 m folded edge)
- Trumabend V850S (85 Tonnes on 2,5 m folded edge, 6-axis end-stop and large slide opening)
- Trumabend V130 (130 Tonnes on 3 m folded edge)
- Colly Bombled PS 2000 (125 Tonnes on 3 m folded edge)
CUTTING PRESS BRET 500T
- Type 2 PACK 50
- Strength 5 000 kN
- Cadence 20 to 70 beats/min
- Running from 20 to 240 mm
- Table dim. 2600 x 1600 mm
POST-PROCESSING PRESS BRET 160T
- Type PCK 16
- Strength1 600 kN
- Cadence 40 to 80 beats/min
- Running from 20 to 220 mm
- Table dim. 1270 x 800 mm
- 2 PlacesTIG
- 2 Places MIG/MAG
- 1 Welding robots SAF TIG/MIG/MAG
- 1 Spot welding unit ARO
- 1 Condensation discharge welding unit
2 Crimping machines (pneumatic and hydraulic)
₋ Crimping standard Rivkle nuts and stud bolts
₋ Assembly with rivets, screws...
- Packaging with accessory bag and instructions for use
Several pillar drilling machines for re-drilling, chamfering and thread cutting.
₋ Galvanising by electrolysis
₋ Painting and cathodic dip coating treatment
₋ Thread cutter Huller
- Nibbling machine
- Column drilling machine
- Bending machine
- Drilling machine Gilardon
- Riveting machine
- Milling machine
- Hydrolytic squeeze press ABL
- Deburring machine
- Saw Castro
- Grinding machine
- Brush
- Three-dimensional measuring machine TESA
- Measuring column ROCH
- Profile spotlight DELTRONIC
- Steel : DC01, DC04, DD11, S235JR, S355MC.
- Galvanised steel : DX51D+Z275, DX51D+Z140.
- Electro-galvanised steel : DC01+ZE25/25APCE.
- Pre-painted steel : S220GD+Z275 RAL9016 or RAL7016
- Aluminium : 5754H111, 1050H24.
- Stainless steel : 1.4016, 1.4301, 1.4307, 1.4404, 1.4310.
- Standard sizes : 3000x1500, 2500x1250, 2000x1000, Special sizes on request.
- Thickness : from 0.5mm to 12mm.
- Average stock level : 200 tonnes.
- Steel : DC01, DD11, DD13.
- Galvanised steel : DX51D+Z275.
- Electro-galvanised steel : DC01+ZE25/25APCE.
- Width from 15mm to 800mm.
- Thickness from 0.5mm to 4mm.
- Average stock level : 150 tonnes.
